 peep
 Moderator |
 Big A$$ Brakes
----- Original Message -----
From: "Jochen Baither"
To:
Sent: Monday, April 23, 2001 9:55 AM
Subject: AW: brakes for camaro
Thank you for your inquiry and your interest in our products.
We would like to offer you the following mov'it-brake systems for Camaro Z28
('96) :
Front axle; for 15/16" rims w/ min. 345 mm I.D.
2 x 4-piston-aluminium-caliper, 36/44 mm piston dia., red
2 x rotors, 304 x 32 mm vented and cast-in holes
1 x pad set for street use (62,5 cm2)
2 x custom adapters for a.m. calipers, CNC machined f/ highest grade steel
alloy
2 x custom brake bells for a.m. rotors, CNC machined f/ highest grade alu.
alloy
1 x custom stainless steel coated PTFE lines for front & rear
The price for this system is 3.899,- DM (plus 16% VAT) and costs for
delivering 200,- DM via German Post Economy (plus 16% VAT).
or alternative
Front axle; for 16/17" rims w/ min. 375 mm I.D.
2 x 4-piston-aluminium-monobloc-caliper, 36/44 mm piston dia., red
2 x rotors, 330 x 34 mm vented and cast-in holes
1 x pad set for street use (78,5 cm2)
2 x custom adapters for a.m. calipers, CNC machined f/ highest grade steel
alloy
1 x custom stainless steel coated PTFE lines for front & rear
The price for this system is 4.399,- DM (plus 16% VAT and costs for
delivering 200,- DM via German Post Economy (plus 16% VAT).
4-piston-aluminium calipers guarantee extreme braking force since they are
developed for heavy street cars, not light race cars.
The non sprung weight is reduced by using highest grade aluminum alloy.
A unique ventilation system with a surface nearly twice as big as a normal
disc guarantees fading free operation, also under extreme conditions on the
track or for heavy security cars.
Our brake kits offer highest quality with maximum braking force and highest
fading resistance.
The lifetime of the wear items is by far higher than any other product on
the market.
It is nearly impossible to bring these brakes to their limits. Absolute no
fading !
All items are produced on our modern in-house CNC working stations, using
highest grade steel or aluminum alloy, under water-ultra sound tested and
coated to prevent corrosion.
If you have further questions do not hesitate to contact us on Phone
+49(0)7062/936050 or Fax +49(0)7062/936051.
Best regards
Stoll automotive GmbH
Jochen Baither |
